{"id":27741,"date":"2025-08-22T12:09:08","date_gmt":"2025-08-22T06:39:08","guid":{"rendered":"https:\/\/www.stellarinfo.co.in\/blog\/?p=27741"},"modified":"2026-01-02T12:26:51","modified_gmt":"2026-01-02T06:56:51","slug":"how-to-fix-server-not-booting-errors-and-recover-data","status":"publish","type":"post","link":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/","title":{"rendered":"Fix \u201cServer Not Booting\u201d Errors and Recover Data Without Downtime"},"content":{"rendered":"<blockquote><p><strong>Summary<\/strong><\/p>\n<ul>\n<li>\u201cServer not booting\u201d issues can be caused by hardware, BIOS, firmware, or software issues, and in some cases, by RAID failures.<\/li>\n<li>You will need to check BIOS settings, drives\u2019 health, and their boot sequence to pinpoint the problem.<\/li>\n<li>Issues wherein your RAID server won\u2019t start require careful handling, particularly if you need to recover the data. Do not force a RAID rebuild as it can make data recovery impossible.<\/li>\n<li>For emergency server data recovery (even in case of complex RAID failures), it\u2019s better to let a <a href=\"https:\/\/www.stellarinfo.co.in\/\" target=\"_blank\" rel=\"noopener\"><strong>professional data recovery service<\/strong><\/a> diagnose the root cause and recover your data.<\/li>\n<\/ul>\n<\/blockquote>\n<p>The moment you boot your server, a complex web of processes kicks off.<\/p>\n<ol>\n<li>First, the <strong>Power-On Self-Test<\/strong> (POST) runs to make sure that all the hardware components of the server are connected and responding.<\/li>\n<li>Next, the BIOS or UEFI firmware takes over. Its job is to <strong>initialize that hardware and locate the correct boot drive<\/strong>.<\/li>\n<li>Finally, it hands off control to the bootloader, which is <strong>a small program that loads the main operating system kernel into memory<\/strong>.<\/li>\n<\/ol>\n<p>When your server does not boot, it means a critical step in its startup sequence has failed.<\/p>\n<h2><strong>Main Causes Why Your Server Is Not Booting<\/strong><\/h2>\n<p>The causes of a server not booting typically fall into one of three categories.<\/p>\n<h3 class=\"h4\"><strong>1. Basic Hardware and Environmental Issues<\/strong><\/h3>\n<p>The issue could be a faulty power supply unit (PSU) that isn&#8217;t delivering stable power. Or, a data or power cable could have come loose. Sometimes, the server overheats and shuts itself down as a safety measure. These are always the first things to check.<\/p>\n<h3 class=\"h4\"><strong>2. Core Component Failure<\/strong><\/h3>\n<p>If the basics check out, the fault could be in a core piece of hardware. A failed CPU, a bad memory (RAM) module, or a fault on the motherboard can all prevent a successful boot.<\/p>\n<h3 class=\"h4\"><strong>3. RAID Configuration Errors<\/strong><\/h3>\n<p>When a RAID server won\u2019t start, the cause is harder to find. Depending on how the multiple drives are configured to work together as a team, the server \u201c<strong>no-boot error<\/strong>\u201d could be linked to:<\/p>\n<ul>\n<li><strong>Foreign Configuration:<\/strong> The RAID controller may have detected one or more drives whose configuration record doesn&#8217;t match its own.<\/li>\n<li><strong>Multiple Drive Failures:<\/strong> For certain configurations (like RAID 5 or RAID 6), a RAID setup can tolerate only a certain number of drives failing at once. But if too many drives fail, the entire array goes offline because it no longer has enough data to function.<\/li>\n<li><strong>Corrupted Metadata:<\/strong> RAID metadata is the map that tells the controller how your data is organized across all the physical disks. If this metadata gets corrupted, the controller finds it difficult to access the array.<\/li>\n<\/ul>\n<h2><strong>How to Identify the Root Cause When the Server Won\u2019t Boot<\/strong><\/h2>\n<p>The steps you could take to boot the server depend on the core issue. Don\u2019t guess; follow these steps to narrow down the cause, and then go for the right fix.<\/p>\n<h3 class=\"h4\"><strong>Step 1: Check the Physical and BIOS Basics<\/strong><\/h3>\n<p>First, start with the basics.\u00a0Is the server receiving power? Are all data and power cables firmly connected?<\/p>\n<p>Then, enter the server&#8217;s BIOS\/UEFI setup.<\/p>\n<ol>\n<li>Ensure the server is set to boot from the correct drive or RAID array.<\/li>\n<li>Verify that the BIOS is recognizing all the HDDs and SSDs. If a drive is not detected in the BIOS, it points to a bad cable, a faulty port, or a dead drive.<\/li>\n<\/ol>\n<h3 class=\"h4\"><strong>Step 2: Look for On-Screen Clues<\/strong><\/h3>\n<p>Pay close attention to the on-screen error message during the startup attempt.<\/p>\n<ul>\n<li>A &#8220;No Boot Device Found&#8221; error points to a drive detection or boot order issue.<\/li>\n<li>&#8220;Still Waiting for Root Device&#8221; on a Linux server indicates a problem with the OS partition.<\/li>\n<\/ul>\n<h3 class=\"h4\"><strong>Step 3: Consult the Management Logs<\/strong><\/h3>\n<p>Servers from brands like HP and Dell have built-in management controllers (like iLO or iDRAC).<\/p>\n<p>These controllers maintain logs that can provide a detailed hardware-level history of events and explicitly state if a component like a PSU, fan, or memory module has failed.<\/p>\n<blockquote><p><strong>Tip: <\/strong>You can access these logs remotely, even if the server won&#8217;t boot into its operating system.<\/p><\/blockquote>\n<h3 class=\"h4\"><strong>Step 4: Use a Live USB to Test the Hardware<\/strong><\/h3>\n<p>Think of a Live USB as a temporary, portable operating system on a stick. By booting from it, you&#8217;re telling the server to ignore its own broken operating system for a moment. If it starts up fine from the USB, you will know your server&#8217;s hardware is likely okay, and the real problem is with the software or the main boot drive. Once you&#8217;re in this live environment, you can also try to access your files and create a backup.<\/p>\n<p>Once you have tried these steps, you&#8217;ll have a much better idea of what you&#8217;re dealing with. If your diagnosis points to a simple settings mistake, you can move on to fixing it. But if all signs point to a failing hard drive or a tricky RAID problem, it&#8217;s time to stop and focus on one thing: <strong>protecting your data before you do anything else<\/strong>.<\/p>\n<h2><strong>RAID Server Boot Errors: Solutions<\/strong><\/h2>\n<p>It can be stressful to find that your RAID server is not booting. The following steps will help you forge a plan to get the server running again.<\/p>\n<h3 class=\"h4\"><strong>Step 1: STOP and Document Everything<\/strong><\/h3>\n<p>Power the server down safely. Before you do anything else, take notes.<\/p>\n<ul>\n<li>Write down the exact error message that was displayed on the screen.<\/li>\n<li>Note the color and pattern of the status lights on the server chassis and on each individual drive bay (e.g., solid green, blinking amber\/orange, solid amber). This is your hardware&#8217;s way of telling you what&#8217;s wrong.<\/li>\n<\/ul>\n<h3 class=\"h4\"><strong>Step 2: Enter the RAID Controller Utility<\/strong><\/h3>\n<p>Power the server on and look out for the prompt to enter the RAID controller&#8217;s BIOS utility during startup. You can do this by pressing a key combination like <strong>Ctrl + R<\/strong> (for Dell PERC) or <strong>Ctrl + I<\/strong> (for Intel).<\/p>\n<h3 class=\"h4\"><strong>Step 3: Assess the Array and Drive Status<\/strong><\/h3>\n<p>Inside the utility, navigate to the virtual disk and physical disk management screens. Do not change any settings; just observe and record the status of:<\/p>\n<ul>\n<li><strong>The Virtual Disk (The Array):<\/strong> Is its status listed as Optimal, Degraded, or Offline?<\/li>\n<li><strong>The Physical Disks:<\/strong> Look at each drive. Are they Online, Failed, Rebuilding, or marked as Foreign?<\/li>\n<\/ul>\n<h3 class=\"h4\"><strong>Step 4: Make an Informed, Safe Decision<\/strong><\/h3>\n<ul>\n<li><strong>If the Array Is Degraded:<\/strong> This means a single drive has failed in a redundant array (like RAID 5 or RAID 1). If you have a recent backup, you can replace the failed physical drive and allow the controller to perform an automatic rebuild.<\/li>\n<li><strong>If the Array Is Offline or Has Multiple Failed\/Foreign Drives:<\/strong> The risks of attempting to force drives online or to import a foreign configuration without expert knowledge are too high. In this situation, the only safe option to recover your data is to contact a professional <strong><a href=\"https:\/\/www.stellarinfo.co.in\/services\/raid-data-recovery.php\" target=\"_blank\" rel=\"noopener\">RAID server data recovery service<\/a><\/strong>.<\/li>\n<\/ul>\n<h2><strong>How to Recover Data When Your Server Won\u2019t Boot<\/strong><\/h2>\n<p>If your server uses any type of RAID or if you suspect any physical drive has failed (e.g., it&#8217;s making noises or wasn&#8217;t detected in the BIOS), DO NOT attempt DIY recovery. The risk of making the situation worse is extremely high.<\/p>\n<p>Why? Because data on a RAID array is striped across multiple disks using a specific algorithm. You cannot simply connect one of these drives to another computer and read the data; the file system will be unreadable and incomplete.<\/p>\n<p>Running any software tool, including a Live USB, on a physically failing drive can cause its components to fail.<\/p>\n<p>In these situations, the only safe and effective solution is to <a href=\"https:\/\/www.stellarinfo.co.in\/raid\/\" target=\"_blank\" rel=\"noopener\"><strong>contact a professional RAID server data recovery service<\/strong><\/a>.<\/p>\n<p>By seeking the advice of Stellar\u2019s RAID recovery experts, you will be able to keep your data safe and improve your chances of a smooth recovery.<\/p>\n<p>Also, it\u2019s equally important to avoid actions that can worsen the problem. Here\u2019s what you should never do when your server won\u2019t boot.<\/p>\n<h2><strong>What NOT to Do When a Server Won\u2019t Boot<\/strong><\/h2>\n<p>A dead server can make anyone panic. Yet the biggest losses occur because of your first few frantic clicks (if you\u2019re not sure what you are doing), not the original fault.<\/p>\n<p>Keep a cool head and avoid these common mistakes.<\/p>\n<ol>\n<li><strong>Don\u2019t keep pressing Reset:<\/strong> Repeated power\u2011cycling is like jolting a stalled car\u2019s engine\u2014each crank strains the aging parts of the machine. After two failed starts, stop and inspect instead.<\/li>\n<li><strong>Don\u2019t ignore beep codes or status LEDs: <\/strong>Those beeps and colored lights are the server\u2019s SOS. Document them before changing anything; the pattern often points straight to the fault.<\/li>\n<li><strong>Don\u2019t pull cables or cards blindly: <\/strong>Yanking components without labels is risky. Photograph or tag every connector first, so reassembly doesn\u2019t create new problems.<\/li>\n<li><strong>Don\u2019t jump straight to an OS reinstall: <\/strong>Reinstalling the OS wipes boot data and hides the real cause, much like painting over a warning light on your dashboard. Diagnose hardware and BIOS settings first.<\/li>\n<li><strong>Avoid running disk\u2011repair tools on shaky drives:<\/strong> Utilities like\u202fchkdsk (Windows) or\u202ffsck (Linux) rewrite file\u2011system maps. On a failing disk, it can smear good data beyond recovery.<\/li>\n<li><strong>When a RAID server won\u2019t boot, don\u2019t force a rebuild:<\/strong> A rebuild tells the controller to rewrite missing stripes across all drives. If the wrong disk dropped out, fresh stripes can bury valid data.<\/li>\n<li><strong>Don\u2019t initialize, quick\u2011format, or import a \u201cforeign\u201d configuration with missing disks: <\/strong>Initialization erases the RAID array\u2019s roadmap. Wait until every drive shows \u201conline,\u201d or seek the advice of a data recovery professional.<\/li>\n<\/ol>\n<p>Follow these \u201cdon\u2019ts\u201d to keep troubleshooting safe, focused, and reversible. That\u2019s how you\u2019ll give yourself the best shot at a clean, speedy recovery.<\/p>\n<p>However, if the problem seems too complex, professional help can save your data.\u00a0Here\u2019s how <strong>Stellar Data Recovery<\/strong> can assist you with even the toughest server failures.<\/p>\n<h2><strong>How Stellar Can Recover Data From Dead Servers<\/strong><\/h2>\n<p>If your server is not booting, Stellar Data Recovery can help you recover your important data safely and quickly. Whether your server is configured as a RAID array or not, data loss can happen for many reasons\u2014hardware failure, corruption, or accidental deletion.<\/p>\n<p>RAID recovery experts at Stellar start by carefully diagnosing the problem to understand what went wrong. Then, they make exact copies of your drives to protect the original data.<\/p>\n<p>Next, our experts use advanced tools to rebuild any damaged storage setups and recover your files. They verify the recovered data to make sure everything is complete and intact.<\/p>\n<p>This careful, step-by-step process keeps your data safe, even when your server won\u2019t boot or it has hardware issues.<\/p>\n<blockquote><p><strong>Case Study: Insurance Company RAID Recovery<\/strong><\/p>\n<p>A top insurance company in India lost 35 TB of vital data after two RAID 5 drives failed.<\/p>\n<p>Stellar\u2019s team carefully rebuilt the RAID and recovered important documents, databases, and media files.\u00a0This quick recovery helped the company avoid long downtime and keep their business running smoothly.<\/p>\n<p>Read about the case and the recovery process in detail: <a href=\"https:\/\/www.stellarinfo.co.in\/case-study\/data-recovery-insurance-company-RAID-5-physical-damage\" target=\"_blank\" rel=\"noopener\"><strong>Data Recovery for Insurance Company: RAID 5 System Affected by Physical Damage<\/strong><\/a><\/p><\/blockquote>\n<blockquote><p><strong>This is just one example. We have worked on multiple other critical server and RAID recovery cases across industries, some of which are given below:<\/strong><\/p>\n<ul>\n<li><strong><a href=\"https:\/\/www.stellarinfo.co.in\/case-study\/nas-box-data-recovery\" target=\"_blank\" rel=\"noopener\">Data Recovery From Hacked RAID-5 Server and NAS Box<\/a><\/strong><\/li>\n<li><strong><a href=\"https:\/\/www.stellarinfo.co.in\/case-study\/weaxor-ransomware-attack-recovery-raid-6\" target=\"_blank\" rel=\"noopener\">32 TB Data Recovered After &#8220;Weaxor Ransomware&#8221; Encrypts Education Company\u2019s RAID 6 Server<\/a><\/strong><\/li>\n<li><strong><a href=\"https:\/\/www.stellarinfo.co.in\/case-study\/crashed-dell-emc-server-data-recovery.php\" target=\"_blank\" rel=\"noopener\">Rescuing Critical Data from Crashed DELL<sup>\u00ae<\/sup>\u00a0EMC RAID 5 Server<\/a><\/strong><\/li>\n<li><strong><a href=\"https:\/\/www.stellarinfo.co.in\/case-study\/nas-raid5-recovery.php\" target=\"_blank\" rel=\"noopener\">Data Recovery from Physically Failed Netgear<sup>\u00ae<\/sup>\u00a0ReadyNAS RAID 5 Server<\/a><\/strong><\/li>\n<\/ul>\n<\/blockquote>\n<h2><strong>How to Prevent Server \u201cNo Boot\u201d Errors<\/strong><\/h2>\n<p>Keeping your server healthy is the best way to avoid boot problems.<\/p>\n<ul>\n<li>Dust can cause overheating, which stops your server from starting. Start by regularly cleaning dust from inside the server.<\/li>\n<li>Make sure all cables, drives, and cards are connected tightly.<\/li>\n<li>Check the boot order in BIOS to ensure your server tries to boot from the correct drive.<\/li>\n<li>If you use RAID, regularly check the RAID status using the management tools to catch problems early.<\/li>\n<li>Use backup power supplies and keep your data backed up regularly. Test your backups to make sure they work.<\/li>\n<\/ul>\n<h2><strong>FAQs: Fixing Server Boot Issues and Recovering Data<\/strong><\/h2>\n<pre><strong style=\"font-size: 16px;\">1. What should I do if my server is not booting?<\/strong><\/pre>\n<p>When a server is not booting, check the basics first: power connections, data cables, and any on-screen error messages or beep codes. After that, enter the BIOS to verify the boot order is correct. If you suspect a hardware or drive failure, do not run any software tools. Instead, consult a <strong><a href=\"https:\/\/www.stellarinfo.co.in\/services\/server-data-recovery.php\" target=\"_blank\" rel=\"noopener\">professional server data recovery service<\/a><\/strong> to prevent making the problem worse.<\/p>\n<pre><strong>2. How can I fix a Dell server showing a \u201cno boot device\u201d error?<\/strong><\/pre>\n<p>A Dell server no boot device error means the BIOS cannot find a bootable operating system. Check the iDRAC management logs for any specific hardware faults. Then, enter the BIOS to confirm that all hard drives are detected and that the correct boot drive or RAID array is at the top of the boot sequence. Also, ensure all internal cables are secure.<\/p>\n<pre><strong>3. My HP ProLiant server won\u2019t boot. What can I do?<\/strong><\/pre>\n<p>If your HP ProLiant server is not booting, first check the iLO management logs and the front-panel status LEDs for any specific hardware error codes. You can also try resetting the BIOS configuration to its defaults. If the issue continues, enter the RAID controller utility to check the health of the array and individual drives and seek the advice of a professional RAID data recovery service.<\/p>\n<pre><strong>4. How do I repair Windows Server 2019 if it won\u2019t boot?<\/strong><\/pre>\n<p>When Windows Server 2019 is not booting, boot from the official installation media and select &#8220;Repair your computer&#8221; to access the Recovery Environment. There, you can use Startup Repair for an automated fix or run manual commands like <strong>bootrec \/fixboot<\/strong>. If repairs fail, prioritize <strong>server data recovery<\/strong> before attempting a full OS reinstallation.<\/p>\n<pre><strong>5. Can I recover data from a RAID server that won\u2019t start?<\/strong><\/pre>\n<p>Yes, data recovery from a RAID server that\u2019s not booting recovery is possible, but it is a complex and high-risk task. Never force a rebuild, initialize disks, or import a foreign configuration when unsure, as this can cause permanent data loss. The only safe method for RAID boot error data retrieval is to consult a professional RAID server data recovery service.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Summary \u201cServer not booting\u201d issues can be caused by hardware, BIOS, firmware, or software issues, and in some cases, by RAID failures. You will need to check BIOS settings, drives\u2019 health, and their boot sequence to pinpoint the problem. Issues wherein your RAID server won\u2019t start require careful handling, particularly if you need to recover [&hellip;]<\/p>\n","protected":false},"author":19,"featured_media":27783,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[32],"tags":[840,837,835,836,839,833,832,834,838],"class_list":["post-27741","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-raid-server","tag-how-to-fix-server-not-booting-error","tag-no-boot-device-found-server","tag-raid-server-not-booting","tag-server-boot-error","tag-server-data-recovery","tag-server-not-booting","tag-server-not-booting-errors","tag-server-wont-boot","tag-windows-server-not-booting","has_thumb"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v24.2 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Fix \u201cServer Not Booting\u201d Errors and Recover Data [2026]<\/title>\n<meta name=\"description\" content=\"Learn why your server won\u2019t boot and how to safely recover data. Also, get expert tips on what to do when your RAID server won\u2019t boot.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Fix \u201cServer Not Booting\u201d Errors and Recover Data [2026]\" \/>\n<meta property=\"og:description\" content=\"Learn why your server won\u2019t boot and how to safely recover data. Also, get expert tips on what to do when your RAID server won\u2019t boot.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/\" \/>\n<meta property=\"og:site_name\" content=\"Stellar Data Recovery Blog - Tips and Solutions\" \/>\n<meta property=\"article:published_time\" content=\"2025-08-22T06:39:08+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-01-02T06:56:51+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.stellarinfo.co.in\/blog\/wp-content\/uploads\/2025\/08\/Fix-Server-Not-Booting-Errors-and-Recover-Data-Without-Downtime.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1000\" \/>\n\t<meta property=\"og:image:height\" content=\"600\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Somdatta De\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Somdatta De\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"10 minutes\" \/>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Fix \u201cServer Not Booting\u201d Errors and Recover Data [2026]","description":"Learn why your server won\u2019t boot and how to safely recover data. Also, get expert tips on what to do when your RAID server won\u2019t boot.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/","og_locale":"en_GB","og_type":"article","og_title":"How to Fix \u201cServer Not Booting\u201d Errors and Recover Data [2026]","og_description":"Learn why your server won\u2019t boot and how to safely recover data. Also, get expert tips on what to do when your RAID server won\u2019t boot.","og_url":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/","og_site_name":"Stellar Data Recovery Blog - Tips and Solutions","article_published_time":"2025-08-22T06:39:08+00:00","article_modified_time":"2026-01-02T06:56:51+00:00","og_image":[{"width":1000,"height":600,"url":"https:\/\/www.stellarinfo.co.in\/blog\/wp-content\/uploads\/2025\/08\/Fix-Server-Not-Booting-Errors-and-Recover-Data-Without-Downtime.jpg","type":"image\/jpeg"}],"author":"Somdatta De","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Somdatta De","Estimated reading time":"10 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/#article","isPartOf":{"@id":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/"},"author":{"name":"Somdatta De","@id":"https:\/\/www.stellarinfo.co.in\/blog\/#\/schema\/person\/94ffc15e164713e1d4ecf1a784c505ce"},"headline":"Fix \u201cServer Not Booting\u201d Errors and Recover Data Without Downtime","datePublished":"2025-08-22T06:39:08+00:00","dateModified":"2026-01-02T06:56:51+00:00","mainEntityOfPage":{"@id":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/"},"wordCount":2341,"commentCount":0,"publisher":{"@id":"https:\/\/www.stellarinfo.co.in\/blog\/#organization"},"image":{"@id":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/#primaryimage"},"thumbnailUrl":"https:\/\/www.stellarinfo.co.in\/blog\/wp-content\/uploads\/2025\/08\/Fix-Server-Not-Booting-Errors-and-Recover-Data-Without-Downtime.jpg","keywords":["how to fix server not booting error","no boot device found server","RAID server not booting","server boot error","server data recovery","server not booting","Server Not Booting Errors","server won\u2019t boot","Windows Server not booting"],"articleSection":["Raid Server"],"inLanguage":"en-GB","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/","url":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/","name":"How to Fix \u201cServer Not Booting\u201d Errors and Recover Data [2026]","isPartOf":{"@id":"https:\/\/www.stellarinfo.co.in\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/#primaryimage"},"image":{"@id":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/#primaryimage"},"thumbnailUrl":"https:\/\/www.stellarinfo.co.in\/blog\/wp-content\/uploads\/2025\/08\/Fix-Server-Not-Booting-Errors-and-Recover-Data-Without-Downtime.jpg","datePublished":"2025-08-22T06:39:08+00:00","dateModified":"2026-01-02T06:56:51+00:00","description":"Learn why your server won\u2019t boot and how to safely recover data. Also, get expert tips on what to do when your RAID server won\u2019t boot.","breadcrumb":{"@id":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/#breadcrumb"},"inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/"]}]},{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/#primaryimage","url":"https:\/\/www.stellarinfo.co.in\/blog\/wp-content\/uploads\/2025\/08\/Fix-Server-Not-Booting-Errors-and-Recover-Data-Without-Downtime.jpg","contentUrl":"https:\/\/www.stellarinfo.co.in\/blog\/wp-content\/uploads\/2025\/08\/Fix-Server-Not-Booting-Errors-and-Recover-Data-Without-Downtime.jpg","width":1000,"height":600,"caption":"Fix-Server-Not-Booting-Errors-and-Recover-Data-Without-Downtime"},{"@type":"BreadcrumbList","@id":"https:\/\/www.stellarinfo.co.in\/blog\/how-to-fix-server-not-booting-errors-and-recover-data\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.stellarinfo.co.in\/blog\/"},{"@type":"ListItem","position":2,"name":"Fix \u201cServer Not Booting\u201d Errors and Recover Data Without Downtime"}]},{"@type":"WebSite","@id":"https:\/\/www.stellarinfo.co.in\/blog\/#website","url":"https:\/\/www.stellarinfo.co.in\/blog\/","name":"Stellar Data Recovery Blog - Tips and Solutions","description":"","publisher":{"@id":"https:\/\/www.stellarinfo.co.in\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.stellarinfo.co.in\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":"Organization","@id":"https:\/\/www.stellarinfo.co.in\/blog\/#organization","name":"Stellar Data Recovery","url":"https:\/\/www.stellarinfo.co.in\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.stellarinfo.co.in\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.stellarinfo.co.in\/blog\/wp-content\/uploads\/2020\/07\/stellar-data-recovery-logo.png","contentUrl":"https:\/\/www.stellarinfo.co.in\/blog\/wp-content\/uploads\/2020\/07\/stellar-data-recovery-logo.png","width":181,"height":52,"caption":"Stellar Data Recovery"},"image":{"@id":"https:\/\/www.stellarinfo.co.in\/blog\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.stellarinfo.co.in\/blog\/#\/schema\/person\/94ffc15e164713e1d4ecf1a784c505ce","name":"Somdatta De","image":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.stellarinfo.co.in\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/cfffdfee0124debc9fce716ff04ef4b5?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/cfffdfee0124debc9fce716ff04ef4b5?s=96&d=mm&r=g","caption":"Somdatta De"},"description":"Somdatta is a professional content writer and analyst focused on the storage technology sector, with expertise in both magnetic and flash storage, as well as cloud computing and virtualization concepts. She translates technical concepts into clear, engaging content to sensitize readers toward a multitude of data loss scenarios and help them gain insights into the nuances of data recovery.","sameAs":["https:\/\/www.linkedin.com\/in\/somdatta-de-36121014b?utm_source=share&utm_campaign=share_via&utm_content=profile&utm_medium=ios_app"],"url":"https:\/\/www.stellarinfo.co.in\/blog\/author\/user17stellar\/"}]}},"_links":{"self":[{"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/posts\/27741","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/users\/19"}],"replies":[{"embeddable":true,"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/comments?post=27741"}],"version-history":[{"count":6,"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/posts\/27741\/revisions"}],"predecessor-version":[{"id":27798,"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/posts\/27741\/revisions\/27798"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/media\/27783"}],"wp:attachment":[{"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/media?parent=27741"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/categories?post=27741"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.stellarinfo.co.in\/blog\/wp-json\/wp\/v2\/tags?post=27741"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}