How to Fix Error Code 0xc000000f in Windows 10/11?

Summary: This blog explains the possible causes behind the error code 0xc000000f. It also mentions some effective solutions to resolve the error. If in case you end up with data loss due to this error, you can use reliable Windows data recovery software to recover your crucial data.

Table of Content:

• Causes of Error Code 0xc000000f
• How to Fix Error Code 0xc000000f?

                  1: Perform Startup Repair
                  2: Use Bootrec.exe in the Windows RE
                  3: Rebuild BCD
                  4: Run CHKDSK Command
                  5: Reset your PC
                  6: Reinstall Windows 11

• Closing Thoughts
• FAQ

The error 0xc000000f in Windows 10/11 usually occurs after upgrading the Windows OS or installing new device drivers, programs, etc. It appears on your system with a blue or black screen. The following error messages appear on your screen:

• Your PC needs to be repaired 0xc000000f Windows 10/11
• Windows failed to start the 0xc000000f fix without installation disc
• Error code 0xc000000f: A required device isn’t connected or can’t be accessed

Also Read: What is Blue Screen 1033 Error?

Due to this error, you won’t be able to boot your system and may lose access to its data as well. But there is no need to worry. You can fix this system error by following the troubleshooting methods mentioned in this blog. But before moving ahead, let’s take a look at the common reasons behind this error.

Causes of Error Code 0xc000000f:

Several reasons can result in the Windows error code 0xc000000f. Of these, we have listed the common ones below:

• Damaged Boot Configuration Data (BCD)
• Corrupted system files
• Faulty device drivers
• Corrupted hard drive
• Malware infection

How to Fix Error Code 0xc000000f?

Follow the below-given troubleshooting methods to fix the Windows 10/11 error code 0xc000000f:

1: Perform Startup Repair

To fix the error code 0xc000000f, you may try performing Startup Repair by using Windows Recovery Environment (RE). Follow the given steps to perform Startup Repair:

• Start your system by using the USB installation media.
• When you see the Windows icon, reboot your PC again.
• Repeat the above steps thrice and it will take you to the Windows Setup screen.
• There, click on ‘Repair your computer.
• On the Automatic Repair screen, go to Advanced > Troubleshoot > Advanced.
• Further, click on Startup Repair from the given options.
• To perform Startup Repair, choose your account and enter the password.
• Click on Continue and proceed with the on-screen instructions to complete the process.
• Now, reboot your system and see if the error is resolved.

Also Read: How to Fix Windows Boot Error 0xc0000098?

2: Use Bootrec.exe in the Windows RE

If the above method didn’t resolve the error, you can try using the Bootrec.exe tool. It helps fix damaged MBR, corrupted Boot Sector, and invalid BCD (Boot Configuration Data) store that may have caused the Windows error code 0xc000000f. To do so, follow the below-given steps:

• Boot the PC with installation media and press a key when asked.
• Click on Repair your computer and go to Advanced options > Troubleshoot > Advanced options > Command Prompt.
• Type bootrec.exe in the text field and press the Enter key.
• At last, close the Command Prompt window and reboot your system.

Read More: What Is Bootrec.exe? Everything You Need to Know About

3: Rebuild BCD

You can try rebuilding the BCD by using the Command Prompt. Here are the steps:

• Boot your system using bootable installation media and open the Command Prompt window in the Automatic Repair environment (see the above-mentioned steps).
• Type the following commands in the Command Prompt window, and press the Enter key.

1. bootrec /fixmbr
2. bootrec /fixboot
3. bootrec /rebuildbcd

• Lastly, close the window and reboot your system.

4: Run CHKDSK Command

The error code 0xc000000f may also occur due to a faulty or corrupted hard drive. To fix corruption with the drive, you can run the CHKDSK command by following the below-given steps:

• Boot your system with installation media and open Command Prompt.
• There, type chkdsk f: /f command and press Enter key.
• When the process completes, close the window and restart the PC.

Also Read: How to Recover Missing Files & Folders After CHKDSK Command?

5: Reset your PC

To resolve the error code 0xc000000f, you can try resetting your PC. It will remove all the problematic apps, programs, device drivers, etc. that may have caused this error. You can also choose between keeping and deleting your files while resetting your system. To reset your PC, proceed with the below stated steps:

• Restart your system with installation media and click Repair your computer > Advanced options > Troubleshoot > Reset your PC.
• Further, you’ll be prompted with two options i.e., Keep my files and Remove everything.
• Choose either of them as per your need. Then, click ‘Just remove your files’, followed by Next.
• A prompt appears on your screen to remove everything from the system. Click Next.
• When prompted, click Reset > Continue.

Also Read: The Computer Won’t Wake Up From Sleep on Windows 11: How to Fix the Issue?

6: Reinstall Windows 11

If due to any reason, none of the above methods works to fix error code 0xc000000f, you’re left with only one option, i.e., Windows reinstallation. For this, you’ll need the USB installer.

Note: Performing a clean install will clean the entire drive partition on which the OS is installed. Therefore, before proceeding with the reinstallation process, you’re advised to first recover your data. To recover the data from a non-booting PC, you can use powerful data recovery software, such as Stellar Data Recovery Professional.

Closing Thoughts

The recovery error code 0xc00000f appears with a black or blue screen. Nevertheless, with the above-given troubleshooting solutions, you’ll be able to fix it easily. At times, you may lose access to your system due to this error. In that case, you can use an easy-to-use yet powerful data recovery software, such as Stellar Data Recovery Professional to recover the data. The software can recover data even from a non-booting or crashed Windows system.

Also Read: Top Data Recovery Software Available in India

FAQ

1. I am facing Windows 11 22H2 error code 0xc000000f, How shall i get it fixed?

To fix Windows 11 error code 0xc000000f, try using Automatic Repair from the installation media, rebuilding the BCD using Command Prompt, running the Check Disk utility, utilizing System Restore, and checking for corrupted system files with the System File Checker. If the issue persists, consider reinstalling Windows after backing up important data or seeking professional help.

Also Read: How to Recover Deleted Files from Windows 10 PC?

2. What is error code 0xc000000f Bitlocker?

Error code 0xc000000f in BitLocker indicates a problem with the boot configuration or BitLocker encryption. To resolve:

1. Unlock the BitLocker drive using the recovery key.
2. Repair the boot configuration using commands like bootrec /rebuildbcd.
3. Check disk utility with chkdsk /f /r C:, replacing C: with the drive letter.
4. Consider using the BitLocker Repair Tool from Microsoft.
5. If possible, restore the drive from a backup.

For persistent issues, contact Microsoft support or seek professional assistance.

3. What is Boot error code 0xC000000F in Azure?

In Azure, error code 0xC000000F suggests a boot configuration problem with a virtual machine. To address:

1. Check Azure Diagnostics, Logs, and Boot Diagnostics for insights.
2. Review the virtual machine’s health status in the Azure portal.
3. Restore the virtual machine from a snapshot or backup if available.
4. Update the boot configuration using commands like bcdboot.
5. Check Azure Service Health for ongoing issues.
6. If issues persist, contact Azure Support through the Azure portal.

Also Read: How to Fix the Windows Update Error 0x80070002?

4. What is Windows Failed to Start 0xc000000f Error Mean?

The “Windows failed to start 0xc000000f” or “BCD error 0xc000000f” error indicates a problem with the Boot Configuration Data (BCD) in Windows. This issue may arise due to a corrupted BCD, damaged system files, incorrect boot settings, or a failing hard drive. To resolve it, you can try using Automatic Repair, rebuilding the BCD, checking for disk errors, utilizing System Restore, or, as a last resort, reinstalling Windows. Always back up your important data before attempting any fixes and seek professional assistance if needed.

Also Read: How to Fix Blank White Screen of Death on Windows 11/10?